slapin/qtmultimedia
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Rename QtMultimediaKit to QtMultimedia.

Browse Source 
There are a few legacy bits left in place so it passes CI, and
then qt5.git etc can be updated.

Change-Id: I6b082e50e6958c72fdabc2974992e16d90dafa3a
Reviewed-on: http://codereview.qt-project.org/5368
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jonas Rabbe <jonas.rabbe@nokia.com>
This commit is contained in:
Michael Goddard
2011-10-06 14:31:58 +10:00
committed by Qt by Nokia
parent 55bc4f2b46
commit 03f22bcdaf
395 changed files with 1393 additions and 3088 deletions
Download Patch File Download Diff File Expand all files Collapse all files

404
src/multimedia/audio/qaudiooutput.cpp Normal file
View File

@@ -0,0 +1,404 @@
/****************************************************************************
**
** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
** All rights reserved.
** Contact: Nokia Corporation (qt-info@nokia.com)
**
** This file is part of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:LGPL$
** GNU Lesser General Public License Usage
** This file may be used under the terms of the GNU Lesser General Public
** License version 2.1 as published by the Free Software Foundation and
** appearing in the file LICENSE.LGPL included in the packaging of this
** file. Please review the following information to ensure the GNU Lesser
** General Public License version 2.1 requirements will be met:
** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Nokia gives you certain additional
** rights. These rights are described in the Nokia Qt LGPL Exception
** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
**
** GNU General Public License Usage
** Alternatively, this file may be used under the terms of the GNU General
** Public License version 3.0 as published by the Free Software Foundation
** and appearing in the file LICENSE.GPL included in the packaging of this
** file. Please review the following information to ensure the GNU General
** Public License version 3.0 requirements will be met:
** http://www.gnu.org/copyleft/gpl.html.
**
** Other Usage
** Alternatively, this file may be used in accordance with the terms and
** conditions contained in a signed written agreement between you and Nokia.
**
**
**
**
**
** $QT_END_LICENSE$
**
****************************************************************************/
#include "qaudio.h"
#include "qaudiodeviceinfo.h"
#include "qaudiosystem.h"
#include "qaudiooutput.h"
#include "qaudiodevicefactory_p.h"
QT_BEGIN_NAMESPACE
/*!
\class QAudioOutput
\brief The QAudioOutput class provides an interface for sending audio data to an audio output device.
\inmodule QtMultimedia
\ingroup multimedia
\since 1.0
You can construct an audio output with the system's
\l{QAudioDeviceInfo::defaultOutputDevice()}{default audio output
device}. It is also possible to create QAudioOutput with a
specific QAudioDeviceInfo. When you create the audio output, you
should also send in the QAudioFormat to be used for the playback
(see the QAudioFormat class description for details).
To play a file:
Starting to play an audio stream is simply a matter of calling
start() with a QIODevice. QAudioOutput will then fetch the data it
needs from the io device. So playing back an audio file is as
simple as:
\snippet doc/src/snippets/multimedia-snippets/audio.cpp Audio output class members
\snippet doc/src/snippets/multimedia-snippets/audio.cpp Audio output setup
The file will start playing assuming that the audio system and
output device support it. If you run out of luck, check what's
up with the error() function.
After the file has finished playing, we need to stop the device:
\snippet doc/src/snippets/multimedia-snippets/audio.cpp Audio output state changed
At any given time, the QAudioOutput will be in one of four states:
active, suspended, stopped, or idle. These states are described
by the QAudio::State enum.
State changes are reported through the stateChanged() signal. You
can use this signal to, for instance, update the GUI of the
application; the mundane example here being changing the state of
a \c { play/pause } button. You request a state change directly
with suspend(), stop(), reset(), resume(), and start().
While the stream is playing, you can set a notify interval in
milliseconds with setNotifyInterval(). This interval specifies the
time between two emissions of the notify() signal. This is
relative to the position in the stream, i.e., if the QAudioOutput
is in the SuspendedState or the IdleState, the notify() signal is
not emitted. A typical use-case would be to update a
\l{QSlider}{slider} that allows seeking in the stream.
If you want the time since playback started regardless of which
states the audio output has been in, elapsedUSecs() is the function for you.
If an error occurs, you can fetch the \l{QAudio::Error}{error
type} with the error() function. Please see the QAudio::Error enum
for a description of the possible errors that are reported. When
an error is encountered, the state changes to QAudio::StoppedState.
You can check for errors by connecting to the stateChanged()
signal:
\snippet doc/src/snippets/multimedia-snippets/audio.cpp Audio output state changed
\sa QAudioInput, QAudioDeviceInfo
*/
/*!
Construct a new audio output and attach it to \a parent.
The default audio output device is used with the output
\a format parameters.
\since 1.0
*/
QAudioOutput::QAudioOutput(const QAudioFormat &format, QObject *parent):
QObject(parent)
{
d = QAudioDeviceFactory::createDefaultOutputDevice(format);
connect(d, SIGNAL(notify()), SIGNAL(notify()));
connect(d, SIGNAL(stateChanged(QAudio::State)), SIGNAL(stateChanged(QAudio::State)));
}
/*!
Construct a new audio output and attach it to \a parent.
The device referenced by \a audioDevice is used with the output
\a format parameters.
\since 1.0
*/
QAudioOutput::QAudioOutput(const QAudioDeviceInfo &audioDevice, const QAudioFormat &format, QObject *parent):
QObject(parent)
{
d = QAudioDeviceFactory::createOutputDevice(audioDevice, format);
connect(d, SIGNAL(notify()), SIGNAL(notify()));
connect(d, SIGNAL(stateChanged(QAudio::State)), SIGNAL(stateChanged(QAudio::State)));
}
/*!
Destroys this audio output.
This will release any system resources used and free any buffers.
*/
QAudioOutput::~QAudioOutput()
{
delete d;
}
/*!
Returns the QAudioFormat being used.
\since 1.0
*/
QAudioFormat QAudioOutput::format() const
{
return d->format();
}
/*!
Uses the \a device as the QIODevice to transfer data.
Passing a QIODevice allows the data to be transferred without any extra code.
All that is required is to open the QIODevice.
If able to successfully output audio data to the systems audio device the
state() is set to QAudio::ActiveState, error() is set to QAudio::NoError
and the stateChanged() signal is emitted.
If a problem occurs during this process the error() is set to QAudio::OpenError,
state() is set to QAudio::StoppedState and stateChanged() signal is emitted.
\since 1.0
\sa QIODevice
*/
void QAudioOutput::start(QIODevice* device)
{
d->start(device);
}
/*!
Returns a pointer to the QIODevice being used to handle the data
transfer. This QIODevice can be used to write() audio data directly.
If able to access the systems audio device the state() is set to
QAudio::IdleState, error() is set to QAudio::NoError
and the stateChanged() signal is emitted.
If a problem occurs during this process the error() is set to QAudio::OpenError,
state() is set to QAudio::StoppedState and stateChanged() signal is emitted.
\since 1.0
\sa QIODevice
*/
QIODevice* QAudioOutput::start()
{
return d->start();
}
/*!
Stops the audio output, detaching from the system resource.
Sets error() to QAudio::NoError, state() to QAudio::StoppedState and
emit stateChanged() signal.
\since 1.0
*/
void QAudioOutput::stop()
{
d->stop();
}
/*!
Drops all audio data in the buffers, resets buffers to zero.
\since 1.0
*/
void QAudioOutput::reset()
{
d->reset();
}
/*!
Stops processing audio data, preserving buffered audio data.
Sets error() to QAudio::NoError, state() to QAudio::SuspendedState and
emits stateChanged() signal.
\since 1.0
*/
void QAudioOutput::suspend()
{
d->suspend();
}
/*!
Resumes processing audio data after a suspend().
Sets error() to QAudio::NoError.
Sets state() to QAudio::ActiveState if you previously called start(QIODevice*).
Sets state() to QAudio::IdleState if you previously called start().
emits stateChanged() signal.
\since 1.0
*/
void QAudioOutput::resume()
{
d->resume();
}
/*!
Returns the number of free bytes available in the audio buffer.
\note The returned value is only valid while in QAudio::ActiveState or QAudio::IdleState
state, otherwise returns zero.
\since 1.0
*/
int QAudioOutput::bytesFree() const
{
return d->bytesFree();
}
/*!
Returns the period size in bytes. This is the amount of data required each period
to prevent buffer underrun, and to ensure uninterrupted playback.
\note It is recommended to provide at least enough data for a full period with each
write operation.
\since 1.0
*/
int QAudioOutput::periodSize() const
{
return d->periodSize();
}
/*!
Sets the audio buffer size to \a value in bytes.
\note This function can be called anytime before start(). Calls to this
are ignored after start(). It should not be assumed that the buffer size
set is the actual buffer size used - call bufferSize() anytime after start()
to return the actual buffer size being used.
\since 1.0
*/
void QAudioOutput::setBufferSize(int value)
{
d->setBufferSize(value);
}
/*!
Returns the audio buffer size in bytes.
If called before start(), returns platform default value.
If called before start() but setBufferSize() was called prior, returns value set by setBufferSize().
If called after start(), returns the actual buffer size being used. This may not be what was set previously
by setBufferSize().
\since 1.0
*/
int QAudioOutput::bufferSize() const
{
return d->bufferSize();
}
/*!
Sets the interval for notify() signal to be emitted.
This is based on the \a ms of audio data processed,
not on wall clock time.
The minimum resolution of the timer is platform specific and values
should be checked with notifyInterval() to confirm the actual value
being used.
\since 1.0
*/
void QAudioOutput::setNotifyInterval(int ms)
{
d->setNotifyInterval(ms);
}
/*!
Returns the notify interval in milliseconds.
\since 1.0
*/
int QAudioOutput::notifyInterval() const
{
return d->notifyInterval();
}
/*!
Returns the amount of audio data processed since start()
was called (in microseconds).
\since 1.0
*/
qint64 QAudioOutput::processedUSecs() const
{
return d->processedUSecs();
}
/*!
Returns the microseconds since start() was called, including time in Idle and
Suspend states.
\since 1.0
*/
qint64 QAudioOutput::elapsedUSecs() const
{
return d->elapsedUSecs();
}
/*!
Returns the error state.
\since 1.0
*/
QAudio::Error QAudioOutput::error() const
{
return d->error();
}
/*!
Returns the state of audio processing.
\since 1.0
*/
QAudio::State QAudioOutput::state() const
{
return d->state();
}
/*!
Sets the volume.
Where \a volume is between 0.0 and 1.0 inclusive.
\since 5.0
*/
void QAudioOutput::setVolume(qreal volume)
{
d->setVolume(volume);
}
/*!
Returns the volume between 0.0 and 1.0 inclusive.
\since 5.0
*/
qreal QAudioOutput::volume() const
{
return d->volume();
}
/*!
\fn QAudioOutput::stateChanged(QAudio::State state)
This signal is emitted when the device \a state has changed.
This is the current state of the audio output.
\since 1.0
*/
/*!
\fn QAudioOutput::notify()
This signal is emitted when a certain interval of milliseconds
of audio data has been processed. The interval is set by
setNotifyInterval().
\since 1.0
*/
QT_END_NAMESPACE
#include "moc_qaudiooutput.cpp"