Added some radio systemtests, edited

Added some detail to the radio systemtest

Edited the Camera systemtest

Change-Id: I61c603e5de8e50400053da26563b937756aea316
Reviewed-by: Daron Andrew Edie <daron.edie@nokia.com>

tests/systemtests/camera/sys_camera.qtt

@@ -41,4 +41,135 @@
 
 //TESTED_COMPONENT=src/multimedia
 
-//These tests have been temporaraly moved
+testcase = {
+
+/* Notes
+*/
+    initTestCase: function()
+    {
+    },
+
+    take_a_photo: function()
+    {
+        // Test meta data
+        testTitle = "Multimedia - Still Camera";
+        testBinary = "camera";
+        testSource = "qt5/qtmultimedia/examples/camera"
+        testGoal = "Verify that a photo can be taken with the camera.";
+        testPreconditions = "None";
+        testGroups = "BAT, 1.2";
+
+        // Test steps
+        prompt(twiki("---+++ " + testTitle + "<br><br>
+            *Goal:* " + testGoal + "<br>
+            *Pre-Requisites:* " + testPreconditions + "<br>
+            *Tested Binary:* " + testBinary + "<br>
+
+            | *Step* | *Verification* |
+            | Launch " + testTitle + " | App launches normally |
+            | If device has lens cover, make sure it is open | |
+            | Select Image tab to put camera in still mode | Verify the intended scene is reproduced in the preview pane/viewfinder |
+            | Select Capture Photo | Verify that image is shown on screen for preview |
+            | | Verify that a new file is in the Images folder and accessibble with the image viewer |
+            | Select given image | Verify that it is a true representation of the intended screen |
+            | | Verify the image has no unintended artifacts and noise and is properly formatted |
+        "));
+    },
+
+    change_camera_settings: function()
+    {
+        // Test meta data
+        testTitle = "Multimedia - Still Camera, Change Settings";
+        testBinary = "camera";
+        testSource = "qt5/qtmultimedia/examples/camera"
+        testGoal = "Verify that the camera can change its Still Camera settings successfully.";
+        testPreconditions = None";
+        testGroups = "BAT, 1.2";
+
+        // Test steps
+        prompt(twiki("---+++ " + testTitle + "<br><br>
+        *Goal:* " + testGoal + "<br>
+        *Pre-Requisites:* " + testPreconditions + "<br>
+        *Tested Binary:* " + testBinary + "<br>
+
+            | *Step* | *Verification* |
+            | Launch " + testBinary + " | App launches normally |
+            | If device has lens cover, make sure it is open | |
+            | Select the primary camera device from Menu/Devices | Verify the viewfinder is displaying the scene from the main camera device |
+            | Select Capture Photo | Verify that a photo was taken and that a preview image is shown on screen |
+            | Select the secondary camera device from Menu/Devices | Verify the viewfinder is displaying the scene from the secondary camera device |
+            | Select Capture Photo | Verify that a photo was taken from the secondary camera device and that a preview image is shown on screen |
+            | Change Exposure Compensation on the slider in the main UI | Verify that the change in value affects the picture quality in expected fashion |
+            | Select Settings/File/Settings | Verify that you have an option to change Image Resolution, Image Format and Quality |
+            | Change Image Resolution to another supported resolution | Verify that you can take stills with various resolutions |
+            | Select Flash always on from the settings menu | Verify that when photo is taken, the flash is always triggered |
+            | Select No Flash on from the menu | Verify that despite the lack of natural light, the flash will not trigger when taking photos |
+            | Change Image Format to another supported format | Verify that you can take stills with various Image Formats |
+            | Select Settings/Device/Secondary Device | Verify that you can see the view from the Front Facing Camera on the viewfinder |
+            |  | Verify that you can take still images from the Front Facing Camera |
+            | Select Settings/File/Exit | Verify that the application has now closed |
+
+        "));
+    },
+
+    take_a_video: function()
+    {
+        // Test meta data
+        testTitle = "Multimedia - Video Camera, Take Video";
+        testBinary = "camera";
+        testSource = "qt5/qtmultimedia/examples/camera"
+        testGoal = "Verify that the camera can capture and save an audio/video file.";
+        testPreconditions = "None";
+        testGroups = "BAT, 1.2";
+
+        // Test steps
+        prompt(twiki("---+++ " + testTitle + "<br><br>
+            *Goal:* " + testGoal + "<br>
+            *Pre-Requisites:* " + testPreconditions + "<br>
+            *Tested Binary:* " + testBinary + "<br>
+
+            | *Step* | *Verification* |
+            | Launch " + testBinary + " | App launches normally |
+            | Select Video icon to put camera in video mode | Verify the intended scene is reproduced in the preview/viewfinder |
+            | Select Record Video | Verify that video is shown on screen for preview |
+            | Select Stop | Verify that the recording has now stopped |
+            | | Verify that the video file is available in the camera preview pane |
+            | Select given video | Verify that it is a true representation of the intended screen |
+            | | Verify the image has no unintended artifacts and noise and is properly formatted |
+        "));
+    },
+
+    change_video_settings: function()
+    {
+        // Test meta data
+        testApplication = "Multimedia - Video Camera, Change Video Settings";
+        testBinary = "camera";
+        testSource = "qt5/qtmultimedia/examples/camera"
+        testGoal = "Verify that the camera can change its Video settings successfully.";
+        testPreconditions = "None";
+        testGroups = "BAT";
+
+        // Test steps
+        prompt(twiki("---+++ " + testTitle + "<br><br>
+             *Goal:* " + testGoal + "<br>
+            *Pre-Requisites:* " + testPreconditions + "<br>
+            *Tested Binary:* " + testBinary + "<br>
+
+            | *Step* | *Verification* |
+            | Launch " + testBinary + " | App launches normally |
+            | If device has lens cover, make sure it is open | |
+            | Select Video tab to put camera in video mode | Verify the intended scene is reproduced in the preview/viewfinder |
+            | In the Menu Bar, select Settings/Devices | Verify that you can select Primary and Secondary Camera on Device |
+            | Select Secondary Camera | Verify that devise is now showing video stream from Front Facing camera |
+            | Select Settings/File/Settings | Verify that you now have the option to select Audio Codecs, Resolution Sample Rate, Framerate, Quality, Video Codecs and Container Format |
+            | Change Audio Codecs to another supported Codecs | Verify that camera can record |
+            | Change Resolution to another supported Resolution | Verify that camera can record |
+            | Change Sample Rate to another supported Sample Rate | Verify that camera can record |
+            | Change Framerate to another supported Framerate | Verify that camera can record |
+            | Change Quality | Verify that camera can record |
+            | Change Video Codecs to another supported Video Codecs | Verify that camera can record |
+            | Change Container Format | Verify that camera can record |
+            | Change Quality | Verify that camera can record |
+        "));
+    },
+}

tests/systemtests/radio/sys_radio.qtt

@@ -52,38 +52,225 @@ A device specific headset is required to be connected to device for radio testin
     {
     },
 
- play_a_radio_transmission: function()
+    play_a_radio_transmission: function()
     {
         // Test meta data
         testTitle = "Multimedia - Play Radio Transmission";
         testBinary = "radio";
-        testSource ="$QTDIR/qtmultimediakit/examples/Radio"
+        testSource ="qt5/qtmultimedia/examples/radio"
         testGoal = "Verify that radio stations can be played.";
         testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antena to the device and must be connected.";
         testGroups = "BAT, 1.2";
 
         // Test steps
-        prompt(twiki("---+++ " + testApplication + "<br><br>
+        prompt(twiki("---+++ " + testTitle + "<br><br>
             *Goal:* " + testGoal + "<br>
             *Pre-Requisites:* " + testPreconditions + "<br>
             *Tested Binary:* " + testBinary + "<br>
 
            | *Step* | *Verification* |
            | Launch " + testBinary + " | App launches normally |
-           | | Verify that 0 KHz and No Signal is displayed |
+           | | If not first time running application on image, verify that you are presented with a list of previously scanned radio stations |
-           | Select [Scan Up] | Audible white noise should be heard as the radio searches for a frequency lock. Frequency should be increasing in 100 KHz steps until a strong signal is found |
+           | Select a radio station from the list | Verify that the station is properly selected |
-           | | Verify that a radio signal can be heard. It is possible for the radio to lock on a silent station signal, in that case progress further up the frequencies |
+           | Select the power icon next to the station name | Verify that audio from the radio station is now heard through the headphones |
-           | Once a strong audible signal is found | Verify that the stations frequency and Got Signal message is displayed |
+           | Deselect the power icon next to the station name | Verify that audio from the radio station is no longer heard through the headphones |
-           | Select [Scan Up] | Verify that the radio has moved off the previous station and in progressing through the frequencies |
+           | Exit the radio application | Verify that the radio application closes cleanly |
-           | Once on a radio station, Select [Freq Up] | Verify that the radio frequency has moved off the station by 100KHz and is stationary |
-           | Select [Freq Up] again | Verify that the radio frequency has moved up another 100KHz and is stationary |
-           | Select [Freq Down] twice | Verify that you are now at the frequency of the previous radio station and that the signal is audible |
-           | Select [Scan Down] | Verify that the radio has moved off the previous station, progressing through the frequencies, and finds the original station from this test |
-           | Exit the radio application | Verify that the radio station is no longer heard |
          "));
     },
 
-    radio_interrupted_by_system_notification: function()
+    change_a_radio_station: function()
+    {
+        // Test meta data
+        testTitle = "Multimedia - Radio: Change radio station";
+        testBinary = "radio";
+        testSource ="qt5/qtmultimedia/examples/radio"
+        testGoal = "Verify that radio station can be changed from station playlist.";
+        testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected.";
+        testGroups = "BAT, 1.2";
+
+    // Test steps
+        prompt(twiki("---+++ " + testTitle + "<br><br>
+            *Goal:* " + testGoal + "<br>
+            *Pre-Requisites:* " + testPreconditions + "<br>
+            *Tested Binary:* " + testBinary + "<br>
+
+           | *Step* | *Verification* |
+           | Launch " + testBinary + " | App launches normally |
+           | Select a radio station from the list | Verify that the station is heard through the headphones |
+           | If in the visualization view, select the down icon to return to the station selection view | Verify that you are presented with the list of stations |
+           | Select a different station | Verify that you are now listening to a different radio station |
+           | Deselect the power icon next to the station name | Verify that audio from the radio station is no longer heard through the headphones |
+           | Exit the radio application | Verify that the radio application closes cleanly |
+         "));
+    },
+
+    manually_tune_radio_station: function()
+    {
+        // Test meta data
+        testTitle = "Multimedia - Manually tune radio station";
+        testBinary = "radio";
+        testSource ="qt5/qtmultimedia/examples/radio"
+        testGoal = "Verify that user can manualy change radio station.";
+        testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected.";
+        testGroups = "BAT, 1.2";
+
+    // Test steps
+        prompt(twiki("---+++ " + testTitle + "<br><br>
+            *Goal:* " + testGoal + "<br>
+            *Pre-Requisites:* " + testPreconditions + "<br>
+            *Tested Binary:* " + testBinary + "<br>
+
+
+           | *Step* | *Verification* |
+           | Launch " + testBinary + " | App launches normally |
+           | Select a radio station from the list | Verify that the station is heard through the headphones |
+           | Select the up icon to be presented to the visualization view | |
+           | Select the Plus icon on the menu bar | Verify that you are presented with the frequency dial |
+           | Note the current selected frequency | |
+           | Select the dot indicator on the frequency dial, and move finger to right | Verify that the frequency on the indicater is now rising and that the audio has gone off the previous station |
+           | Keep moving selector until a radio station is heard | Verify that the frequency of the selected station is higher than the originaly selected station |
+           | | Verify that the station is playing properly |
+           | Select to save the selected radio station frequency | Verify that the station is saved in the radiostation playlist |
+           | Exit the radio application | Verify that the radio application closes cleanly |
+         "));
+    },
+
+    scan_up_and_down: function()
+    {
+        // Test meta data
+        testTitle = "Multimedia - Scan up and down the frequency";
+        testBinary = "radio";
+        testSource ="qt5/qtmultimedia/examples/radio"
+        testGoal = "Verify that radio can scan up and down the FM frequency.";
+        testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected.";
+        testGroups = "BAT, 1.2";
+
+    // Test steps
+        prompt(twiki("---+++ " + testTitle + "<br><br>
+            *Goal:* " + testGoal + "<br>
+            *Pre-Requisites:* " + testPreconditions + "<br>
+            *Tested Binary:* " + testBinary + "<br>
+
+           | *Step* | *Verification* |
+           | Launch " + testBinary + " | App launches normally |
+           | Select a radio station from the list | Verify that the station is heard through the headphones |
+           | Select the up icon to be presented to the visualization view | |
+           | Select the Plus icon on the menu bar | Verify that you are presented with the frequency dial |
+           | Note the current selected frequency | |
+           | Select the Scan Up Frequency controll | Verify that application has located a new station and that the frequency displayed is of the new station |
+           | | Verify that the station is playing properly |
+           | Select to save the selected radio station frequency | Verify that the station is saved in the radiostation playlist |
+           | Select the Scan Down Frequency control | Verify that application has located the original station and that the frequency displayed is of the original station |
+           | | Verify that the station is playing properly |
+           | Select to save the selected radio station frequency | Verify that the station is saved in the radiostation playlist |
+           | Exit the radio application | Verify that the radio application closes cleanly |
+         "));
+    },
+
+    scan_for_multiple_radio_stations: function()
+       {
+        // Test meta data
+        testTitle = "Multimedia - Radio: Scan for multiple radio station";
+        testBinary = "radio";
+        testSource ="qt5/qtmultimedia/examples/radio"
+        testGoal = "Verify that radio can scan for multiple stations at once.";
+        testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected.";
+        testGroups = "BAT, 1.2";
+
+    // Test steps
+        prompt(twiki("---+++ " + testTitle + "<br><br>
+            *Goal:* " + testGoal + "<br>
+            *Pre-Requisites:* " + testPreconditions + "<br>
+            *Tested Binary:* " + testBinary + "<br>
+
+           | *Step* | *Verification* |
+           | Launch " + testBinary + " | App launches normally |
+           | On the menu, select Find new station | In the Radio Dialog Scanning view, observe the number of stations found |
+           | Exit the radio application | Verify that the radio application closes cleanly |
+         "));
+    },
+
+    save_radio_station_list: function()
+    {
+        // Test meta data
+        testTitle = "Multimedia - Radio: Save station playlist";
+        testBinary = "radio";
+        testSource ="qt5/qtmultimedia/examples/radio""
+        testGoal = "Verify that radio can save station playist.";
+        testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected.";
+        testGroups = "BAT, 1.2";
+
+    // Test steps
+        prompt(twiki("---+++ " + testTitle + "<br><br>
+            *Goal:* " + testGoal + "<br>
+            *Pre-Requisites:* " + testPreconditions + "<br>
+            *Tested Binary:* " + testBinary + "<br>
+
+           | *Step* | *Verification* |
+           | Launch " + testBinary + " | App launches normally |
+           | Select to scan for multiple stations | Verify that multiple stations have been found |
+           | Select to save station playlist | |
+           | Close application | Verify that the application closes |
+           | Reopen " + testBinary + " | Verify that the app launches normally |
+           | Go to station playlist | Verify that the stations from the previous search are listed |
+           | Select various stations from playlist | Verify that radio station play properly |
+           | Close application | Verify that radio application closes properly |
+           "));
+    },
+
+    switch_audio_to_speakers: function()
+    {
+        // Test meta data
+        testTitle = "Multimedia - Radio: Switch audio to speakers";
+        testBinary = "radio";
+        testSource ="qt5/qtmultimedia/examples/radio"
+        testGoal = "Verify that radio can be output to external speakers.";
+        testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected.";
+        testGroups = "BAT, 1.2";
+
+
+    // Test steps
+        prompt(twiki("---+++ " + testTitle + "<br><br>
+            *Goal:* " + testGoal + "<br>
+            *Pre-Requisites:* " + testPreconditions + "<br>
+            *Tested Binary:* " + testBinary + "<br>
+
+           | *Step* | *Verification* |
+           | Launch " + testBinary + " | App launches normally |
+           | Select an audible radio station | Verify that the station can be heard through the speakers |
+           | Select from station menu: Turn On loudspaeker | Verify that the audio can be heard through the device speakers |
+           | Select from the station menu: Turn Off Loudspeakers | Verify that the audio has now reverted back to the headphones |
+           | Close application | Verify that radio application closes properly |
+           "));
+    },
+
+ handle_headset_removal: function()
+    {
+        // Test meta data
+        testTitle = "Multimedia - Radio: Handle headset removal";
+        testBinary = "radio";
+        testSource ="qt5/qtmultimedia/examples/radio"
+        testGoal = "Verify that radio can handle removal and insertion of headset.";
+        testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected.";
+        testGroups = "BAT, 1.2";
+
+
+    // Test steps
+        prompt(twiki("---+++ " + testTitle + "<br><br>
+            *Goal:* " + testGoal + "<br>
+            *Pre-Requisites:* " + testPreconditions + "<br>
+            *Tested Binary:* " + testBinary + "<br>
+
+           | *Step* | *Verification* |
+           | Launch " + testBinary + " | App launches normally |
+           | Select an audible radio station | Verify that the station can be heard through the headset |
+           | Remove headset from device | Verify that warning sign is informing user of the need to re-insert the headset |
+           | Re-insert headset | Verify that the warning has now disappeard, and that the radio station can be heard once again |
+           | Close application | Verify that radio application closes properly |
+           "));
+    },
+
+ radio_interrupted_by_system_notification: function()
     {
         // Test meta data
         testTitle = "Multimedia - Radio interrupted by System Notification";
@@ -94,7 +281,7 @@ A device specific headset is required to be connected to device for radio testin
         testGroups = "BAT, 1.2";
 
         // Test steps
-        prompt(twiki("---+++ " + testApplication + "<br><br>
+        prompt(twiki("---+++ " + testTitle + "<br><br>
             *Goal:* " + testGoal + "<br>
             *Pre-Requisites:* " + testPreconditions + "<br>
             *Tested Binary:* " + testBinary + "<br>
@@ -104,7 +291,8 @@ A device specific headset is required to be connected to device for radio testin
            | Locate a strong radio station signal by scanning up/down | |
            | While on a strong and audible radio signal, evoke a system notification on device (eg: incoming SMS, alarm notification) | Verify that the radio has muted, and after the system notification has been delivered, the radio reverts to outputting the audio signal back through the headphones |
            | While on a strong and audible radio signal, call the device | Verify that the radio has been muted, and stays muted during the duration of the call, and resumes once the call has ended  |
-           "));
+           | Close application | Verify that radio application closes properly |
+        "));
     },
 
     radio_volume_control: function()
@@ -117,7 +305,7 @@ A device specific headset is required to be connected to device for radio testin
      testGroups = "BAT, 1.2";
 
      // Test steps
-     prompt(twiki("---+++ " + testApplication + "<br><br>
+     prompt(twiki("---+++ " + testTitle + "<br><br>
          *Goal:* " + testGoal + "<br>
          *Pre-Requisites:* " + testPreconditions + "<br>
          *Tested Binary:* " + testBinary + "<br>
@@ -132,7 +320,7 @@ A device specific headset is required to be connected to device for radio testin
        "));
     },
 
-    display_radio_metadata: function()
+ display_radio_metadata: function()
     {
      // Test meta data
      testTitle = "Multimedia - Display Radio Metadata";
@@ -142,7 +330,7 @@ A device specific headset is required to be connected to device for radio testin
      testGroups = "BAT, 1.2";
 
      // Test steps
-     prompt(twiki("---+++ " + testApplication + "<br><br>
+     prompt(twiki("---+++ " + testTitle + "<br><br>
          *Goal:* " + testGoal + "<br>
          *Pre-Requisites:* " + testPreconditions + "<br>
          *Tested Binary:* " + testBinary + "<br>