The metaDataChanged() and metaDataAvailableChanged() signals should
be emitted immediately when changing or clearing the current media.
Change-Id: I3152e2c32420ba6f11cf6780013e02208a9d6599
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
Prefer mp4 and mp3 over ogv and mkv.
Change-Id: Id24d475207ccf76e113557f9ad14775477f414aa
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
The signal was not emitted at the right time or with incorrect values
under certain circumstances.
Change-Id: Ib8b1d38381d908399752856db7b0a987c4422bb1
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
The previous behavior was to simply switch from the internal
control to the service's control, discarding anything that was
added to the playlist before binding.
We now carry over the changes made to the playlist when switching
controls. This means the switch is now transparent to the user.
When the service's control is read-only, we cannot transfer the
items, which means the user must be notified of the items that
might have been "lost" during the switch.
Auto-test modified to reflect this change.
Change-Id: Ibf80b650b06425ddbaeb320b72ac5d3082a25960
Reviewed-by: Jim Hodapp <jim.hodapp@canonical.com>
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
These were found to also fail in OSX 10.11
Task-number: QTBUG-46368
Change-Id: Ifac6fd0540ff63f3eb5198b5ac76c65ee893f005
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
These were found to fail also in OSX 10.11
Task-number: QTBUG-46331
Change-Id: I619816655c614c08183ab700bca8bd7ec5384a91
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
According to the AVCaptureDevice documentation, the device must be
locked before starting the capture session to prevent the activeFormat
from being overridden. We now do that, but only if we explicitly set
an activeFormat. Otherwise the device is not locked, which allows
the session to find an appropriate format for the capture device.
The device is also locked when enabling video capture, as doing so
might also reset the activeFormat.
Task-number: QTBUG-49170
Change-Id: I75478fd4bbfec96cd2abd2c3ae2951088b38978e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
GStreamer's backend does not implements this features, therefore now is
used the V4L2 interface for the contrast, saturation, brightness and the
sharpening adjustments. The V4l2 interface works together with the
GStreamer and covers the features which are not supported by the
GStreamer.
Change-Id: I995ed6cb096a29543fb80206384a92c13a1d1af2
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
We can simplify a code, do not need to call pVideoProcAmp->Get()
each time when we want to get current parameter value. It is
better to do this once from updateImageProcessingParametersInfos().
In this case we will return desired parameter from the local cache.
Change-Id: If33c3882230c9ae817071ace5b792dfe31685a7f
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
GStreamer does not support setup of manual color temperature for the
camera. Now it is implemented through the V4L2 interface, where it is
works together with the GStreamer and covers the GStreamer's holes.
Change-Id: Icaeadeb4e21ec7865bcfa908bead318d4ead8ba5
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
Although the Qt Multimedia module has two submodules, a
single project is sufficient to document these submodules,
avoiding unnecessary maintenance overhead.
Change-Id: I8fab48241b5c9aba35890a8aaa28ce7154f78c45
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Only use the default streams and make sure only one stream of each kind
(audio/video) is added to the topology.
Change-Id: Ied37174fa722068b4cd1b5f91b60e0cef5c1d7b3
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
Set the right flags so the renderer doesn't allocate its samples.
We can then just forward the samples we get from the upstream element
and avoid a copy.
Change-Id: Iafc15b81531a7415823d063c47a326ea6239136f
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
- report supported types (same as the video sink)
- handle type changes coming from upstream
Change-Id: I922fc4869ecac3999e055c39adf1b847127a0012
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
Some devices require MediaRecorder.setPreviewDisplay() to always be
called, even though the Android doc says otherwise.
Task-number: QTBUG-37837
Change-Id: I1e9b56f06e7c41bdf684f93b5ec7635f8ae9f379
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
QCamera can now pass raw frame data to its QAbstractVideoSurface.
The now deprecated Android camera API we're using doesn't allow to
get frame data without also displaying the frames in a SurfaceView
or a SurfaceTexture. To work around that, an invisible dummy
SurfaceView is used.
This allows to retrieve frames in the NV21, YV12, YUY2 or RGB565
formats, depending on the Android version and on the device.
Task-number: QTBUG-35416
Change-Id: I77b4f50505c3b91efb4b2288a57f50398922c0db
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
There's no need for callbacks to block any other threads from reading
from the camera pool, so use a read/write lock instead. There's also no
benefits gained from using a QMap, so use a QHash map instead.
Change-Id: Iaac74c0173d2dddc296f5d2c03116724ffdc588c
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
On play, if we're at the end of media, set the position to
the beginning. The code was previously setting the position
to the last known position, likely just prior to the end
which causes the last few frames of video to be played
endlessly.
Task-number: QTBUG-49668
Change-Id: I9613114294c22152dd66ae7111c38c8cdef5b907
Reviewed-by: Dan Cape <dcape@qnx.com>
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
Because of an incorrect 'if' condition, the video capture session was
set up twice when starting the camera.
Change-Id: I4211a8c77ab9b8086628fb0f12fb28842de830cf
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
Image capture resolution and viewfinder resolution must be the same,
with the image capture resolution taking precedence over the viewfinder
resolution when both are explicitly set.
The code was getting the active image capture resolution, instead of
the one explicitly requested, to adjust the viewfinder resolution.
That effectively made the viewfinder resolution always ignored since
the active capture resolution always has a default value.
Task-number: QTBUG-49170
Change-Id: I2f3d01366d83a3e28c0a1ea0109663cfdfa75963
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Not all camera operations are documented to raise exceptions, but they
actually might do so depending on the hardware/drivers.
Check for exceptions in all functions that could porentially fail
and react appropriately.
Task-number: QTBUG-49134
Change-Id: I633ca7f2e3aeb6532e1c445735e62135f52cf25f
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
This commit implements the contrast, saturation, brightness and
sharpening adjustments, using DirectShow backend.
Change-Id: I438595550ff804f2a20028b4bc020c566d309127
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
Relax the check for SND_LIB_MINOR and SND_LIB_SUBMINOR so that ALSA
1.1.x is not considered older than 1.0.10. QtMultimedia builds fine with
ALSA 1.1.
Change-Id: If697c34cc7d9bbe2f2a3413d0c25ac4de4e93b34
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
Add Lumia 930 to the camera texture blacklist.
Task-number: QTBUG-49660
Change-Id: Icc4cdbb5e5e736b2273c46f0537a62aeaad0c605
Reviewed-by: Matti Malinen <matti.malinen@digia.com>
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Fix warning:
player\directshowplayercontrol.cpp:56:12: warning: 'int decibelsToVolume(int)' defined but not used [-Wunused-function]
Change-Id: Ic482be6b58f675da008a0e0600d73c127871f3d7
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
This plugin uses QAudioInput as audio source for the recording, just
forward the volume to it.
Change-Id: Ice3ec5e48195b13d5f738b79a357dfc261ad8955
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
Retrieving the supported viewfinder settings don't actually require
a video surface, we just need a capture device. The supported settings
can now be retrieved without calling QCamera::setSurface().
More generally, all viewfinder settings that don't require a video
surface can now be gotten/set before calling setSurface().
Task-number: QTBUG-49170
Change-Id: I39b14eeb40517a9ba399748b5778be8bbc8cfcda
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Private API meant to be used by plugins whose backends expect frame
rate values represented by a ratio.
The function implementation was moved from the AVFoundation plugin
to the QtMultimedia library.
Change-Id: I555b9d5da5ca3bae88992ed03501869fb731e45f
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
The documented minimum GStreamer version for Qt Multimedia is 0.10.24,
however, the camerabin plugin actually required 0.10.32 to compile
successfully. The reason is mainly due to the GstEncodingProfiles
API, which is used to implement the audio and video encoding settings
controls. There's no hard requirement for that API anymore and the
aforementioned controls simply don't do anything when the GStreamer
version used to compile is older than 0.10.32.
A few other GStreamer calls had to be ifdef'd or replaced in order
to compile with 0.10.24.
Note that this patch only makes sure it compiles with older versions,
running the camerabin plugin with GStreamer < 0.10.32 is currently
untested and it might not work as expected.
Task-number: QTBUG-48914
Change-Id: I4ce8e932f24a33e919e29326729e12bbae561faf
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
Return early from focus related methods when async operation reports
that it is write protected.
Change-Id: I41bf9121e7ae431e5158b5e4c43cde582c30dfd7
Task-Id: QTBUG-49347
Reviewed-by: Peng Wu <peng.wu@intopalo.com>
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
After installing the gstreamer plugins, these tests that used to be
blacklisted pass now.
Change-Id: I9be38ceb45f007930257d72d6b22a44ae661ad07
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
After installing the gstreamer-plugins, these tests still fail.
Blacklist them until they get fixed.
Change-Id: I5acbd5a4911253e96e40e30a2faf161bfa387989
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
According to the documentation of ListModel.get, "The returned object
is not guaranteed to remain valid. It should not be used in property
bindings." So the property bindings have been removed, and a js function
has been introduced to update the properties upon list change.
Task-number: QTBUG-49221
Change-Id: Idaed746ca237198b52a3aff0234076331e1512c1
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
