23af917dc5
Added some radio functionality to match the qlm radio example Change-Id: Ie0358c3443121b638db406e095467b18b4d6b57c Reviewed-by: Daron Andrew Edie (cherry picked from commit 1e542df82fbcc4e3a8f75537af204f83827a4587) Reviewed-by: Michael Goddard <michael.goddard@nokia.com>
162 lines
8.3 KiB
Plaintext
162 lines
8.3 KiB
Plaintext
/****************************************************************************
|
|
**
|
|
** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
|
|
** All rights reserved.
|
|
** Contact: Nokia Corporation (qt-info@nokia.com)
|
|
**
|
|
** This file is part of the Qt Mobility Components.
|
|
**
|
|
** $QT_BEGIN_LICENSE:LGPL$
|
|
** GNU Lesser General Public License Usage
|
|
** This file may be used under the terms of the GNU Lesser General Public
|
|
** License version 2.1 as published by the Free Software Foundation and
|
|
** appearing in the file LICENSE.LGPL included in the packaging of this
|
|
** file. Please review the following information to ensure the GNU Lesser
|
|
** General Public License version 2.1 requirements will be met:
|
|
** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
|
|
**
|
|
** In addition, as a special exception, Nokia gives you certain additional
|
|
** rights. These rights are described in the Nokia Qt LGPL Exception
|
|
** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
|
|
**
|
|
** GNU General Public License Usage
|
|
** Alternatively, this file may be used under the terms of the GNU General
|
|
** Public License version 3.0 as published by the Free Software Foundation
|
|
** and appearing in the file LICENSE.GPL included in the packaging of this
|
|
** file. Please review the following information to ensure the GNU General
|
|
** Public License version 3.0 requirements will be met:
|
|
** http://www.gnu.org/copyleft/gpl.html.
|
|
**
|
|
** Other Usage
|
|
** Alternatively, this file may be used in accordance with the terms and
|
|
** conditions contained in a signed written agreement between you and Nokia.
|
|
**
|
|
**
|
|
**
|
|
**
|
|
**
|
|
** $QT_END_LICENSE$
|
|
**
|
|
****************************************************************************/
|
|
|
|
//TESTED_COMPONENT=src/multimedia
|
|
|
|
testcase = {
|
|
|
|
/* Notes
|
|
Ensure radio reception is available in testing area
|
|
A device specific headset is required to be connected to device for radio testing
|
|
*/
|
|
|
|
initTestCase: function()
|
|
{
|
|
},
|
|
|
|
play_a_radio_transmission: function()
|
|
{
|
|
// Test meta data
|
|
testTitle = "Multimedia - Play Radio Transmission";
|
|
testBinary = "radio";
|
|
testSource ="$QTDIR/qtmultimediakit/examples/Radio"
|
|
testGoal = "Verify that radio stations can be played.";
|
|
testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antena to the device and must be connected.";
|
|
testGroups = "BAT, 1.2";
|
|
|
|
// Test steps
|
|
prompt(twiki("---+++ " + testApplication + "<br><br>
|
|
*Goal:* " + testGoal + "<br>
|
|
*Pre-Requisites:* " + testPreconditions + "<br>
|
|
*Tested Binary:* " + testBinary + "<br>
|
|
|
|
| *Step* | *Verification* |
|
|
| Launch " + testBinary + " | App launches normally |
|
|
| | Verify that 0 KHz and No Signal is displayed |
|
|
| Select [Scan Up] | Audible white noise should be heard as the radio searches for a frequency lock. Frequency should be increasing in 100 KHz steps until a strong signal is found |
|
|
| | Verify that a radio signal can be heard. It is possible for the radio to lock on a silent station signal, in that case progress further up the frequencies |
|
|
| Once a strong audible signal is found | Verify that the stations frequency and Got Signal message is displayed |
|
|
| Select [Scan Up] | Verify that the radio has moved off the previous station and in progressing through the frequencies |
|
|
| Once on a radio station, Select [Freq Up] | Verify that the radio frequency has moved off the station by 100KHz and is stationary |
|
|
| Select [Freq Up] again | Verify that the radio frequency has moved up another 100KHz and is stationary |
|
|
| Select [Freq Down] twice | Verify that you are now at the frequency of the previous radio station and that the signal is audible |
|
|
| Select [Scan Down] | Verify that the radio has moved off the previous station, progressing through the frequencies, and finds the original station from this test |
|
|
| Exit the radio application | Verify that the radio station is no longer heard |
|
|
"));
|
|
},
|
|
|
|
radio_interrupted_by_system_notification: function()
|
|
{
|
|
// Test meta data
|
|
testTitle = "Multimedia - Radio interrupted by System Notification";
|
|
testBinary = "radio";
|
|
testSource ="$QTDIR/qtmultimediakit/examples/Radio"
|
|
testGoal = "Verify that radio can recover audio playback from various system notifications.";
|
|
testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antena to the device and must be connected.";
|
|
testGroups = "BAT, 1.2";
|
|
|
|
// Test steps
|
|
prompt(twiki("---+++ " + testApplication + "<br><br>
|
|
*Goal:* " + testGoal + "<br>
|
|
*Pre-Requisites:* " + testPreconditions + "<br>
|
|
*Tested Binary:* " + testBinary + "<br>
|
|
|
|
| *Step* | *Verification* |
|
|
| Launch " + testBinary + " | App launches normally |
|
|
| Locate a strong radio station signal by scanning up/down | |
|
|
| While on a strong and audible radio signal, evoke a system notification on device (eg: incoming SMS, alarm notification) | Verify that the radio has muted, and after the system notification has been delivered, the radio reverts to outputting the audio signal back through the headphones |
|
|
| While on a strong and audible radio signal, call the device | Verify that the radio has been muted, and stays muted during the duration of the call, and resumes once the call has ended |
|
|
"));
|
|
},
|
|
|
|
radio_volume_control: function()
|
|
{
|
|
// Test meta data
|
|
testTitle = "Multimedia - Radio Volume Control";
|
|
testBinary = "radio";
|
|
testGoal = "Verify that the radio volume can be controlled via volume controls.";
|
|
testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antena to the device and must be connected.";
|
|
testGroups = "BAT, 1.2";
|
|
|
|
// Test steps
|
|
prompt(twiki("---+++ " + testApplication + "<br><br>
|
|
*Goal:* " + testGoal + "<br>
|
|
*Pre-Requisites:* " + testPreconditions + "<br>
|
|
*Tested Binary:* " + testBinary + "<br>
|
|
|
|
| *Step* | *Verification* |
|
|
| Launch " + testBinary + " | App launches normally |
|
|
| Locate a strong radio station signal by scanning up or down the frequency | |
|
|
| While on a strong and audible radio signal, move volume slider to the right | Verify that the audio volume of the radio station is amplified |
|
|
| Move volume slider to the left | Verify that the audio volume is lowered |
|
|
| Move the volume slider all the way to the left | Verify that the sound is now completely muted |
|
|
| Return the volume to a value above 50% and click the Mute/unmute comend | Verify that the audio changes from being muted to unmuted and back |
|
|
"));
|
|
},
|
|
|
|
display_radio_metadata: function()
|
|
{
|
|
// Test meta data
|
|
testTitle = "Multimedia - Display Radio Metadata";
|
|
testBinary = "radio";
|
|
testGoal = "Verify that the radio API can display properly formated meta data.";
|
|
testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antena to the device and must be connected.";
|
|
testGroups = "BAT, 1.2";
|
|
|
|
// Test steps
|
|
prompt(twiki("---+++ " + testApplication + "<br><br>
|
|
*Goal:* " + testGoal + "<br>
|
|
*Pre-Requisites:* " + testPreconditions + "<br>
|
|
*Tested Binary:* " + testBinary + "<br>
|
|
|
|
| *Step* | *Verification* |
|
|
| Launch " + testBinary + " | App launches normally |
|
|
| Locate a strong radio station signal by scanning up or down the frequency | Verify that the Frequency field is populated with the correct frequency for the given radio station |
|
|
| | Verify that the Volume field is displaying the proper volume % |
|
|
| Click on the Mute/Unmute comand | Verify that Muted field changes from 'false' to 'true' and back |
|
|
| | If applicable, confirm that the Station Name field is properly displayed |
|
|
| | If applicable, confirm that the Station Id field is properly displayed |
|
|
| | If applicable, confirm that the Program Type field is properly displayed |
|
|
| | If applicable, confirm that the PRadio Text field is properly displayed |
|
|
"));
|
|
},
|
|
}
|