In push mode, the state must be IdleState after resume(), and only
change to ActiveState once it receives some data.
Task-number: QTBUG-50390
Change-Id: Idd08d8826f00d943b3bf750524f811874e010149
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@theqtcompany.com>
In push mode, the state must be IdleState after resume(), and only
change to ActiveState once it receives some data.
Change-Id: I8caff011f517e91629abf45af51580f24136bcea
Task-number: QTBUG-50390
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@theqtcompany.com>
In push mode, the state must be IdleState after resume(), and only
change to ActiveState once it receives some data.
Task-number: QTBUG-50390
Change-Id: I4a38aa84a55e90d7a2db3e1d504674b2a688bbde
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@theqtcompany.com>
In push mode, the state must be IdleState after resume(), and only
change to ActiveState once it receives some data.
Task-number: QTBUG-50390
Change-Id: I0e12f4eaff350b9423e44779f229e0e1061cf576
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@theqtcompany.com>
Allow our GstAppSrc wrapper to be reconfigured with a new GstAppSrc
object. This is necessary because that object changes every time
playback is restarted, even for the same source. The consequence of
not allowing the reconfigure was that playback for a given qrc media
would only work the first time; any subsequent calls to play() would
not work since our wrapper wouldn't know about the new GstAppSrc object
and therefore wouldn't be able to produce any data.
Also improved management of the wrapper lifecycle.
Task-number: QTBUG-49531
Change-Id: I905afb6848cc7e9a563b4edc2c5875cdd7e53d21
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
The backend uses triple buffering in the background to prefetch some
buffers. However, at some point it tries to invoke SetCurrentPosition
beyond the end of the file. MSDN states that for IMFByteStream one
should return E_INVALIDARG, but that has negative sideeffects.
What happens is that immediately MF_MEDIA_ENGINE_ERR_DECODE is sent
causing the playback to stop, even if there are still valid buffers in
the queue. The example in the bug reports causes up to 5 seconds of
playback to be lost. This can also be reproduced with larger files.
To circumvent this, return S_FALSE instead to still notify that seeking
in the buffer did not work.
Task-number: QTBUG-49236
Change-Id: Id4b093bf9480f5d02c7f9191fa4424f51c60e078
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
In debug mode we try to set the D3D11_CREATE_DEVICE_DEBUG flag to gather
additional information for debugging purposes. However, some devices do
not provide those and the D3D11CreateDevice call fails.
Instead, try to create a hardware non-debug device first before going
into the last software-mode fallback.
Task-number: QTBUG-49488
Change-Id: I2d91b5f54f7fd818103bd106314b8503e5759159
Reviewed-by: Samuel Nevala <samuel.nevala@intopalo.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Make sure the tested QVideoWidget has a valid size.
Since 7b63c45d in qtbase, native widgets are required to have a valid
size to be shown. This test relies on qWaitForWindowExposed() to work
correctly, which means the widget must be shown and thus must have
a valid size.
Change-Id: I13bc1536d788d9ba56b4dcbf0c60851b5634be9e
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Even if QAudioOutput has finished playing audio state don't
change to stopped because QSoundEffect checks only
QAudio::IdleState as when to stop itself.
Change-Id: Iea3a4926c87ea5a7b440e62d832bbc13bcdd3b6d
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
Previous place for clearing received signal could errounsely
clear already sent signal which causes next signalState
comparison to fail on some platform.
Change-Id: Iaffdbbcab1ec9afa0be6f1f7b7aee62b981ee319
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
Not all backends have empty default category
Change-Id: I55025bf213063c5fd64dd5be4031aabf3a148a7b
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
Depending on platform it is unknown how many times it has already been
actually playing the audio.
Change-Id: I27b65cee8de5f9f75ceda277ee22d86f7897ce7b
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
Removed hard dependency to Angle; it's now required only when rendering
to a texture. If Angle is not used, the buffers are now mappable to
system memory.
This enables HW-accelerated video decoding in QML for non-ANGLE
builds. Note that the frame data have to do a round-trip through system
memory, which is not ideal but still faster than SW decoding.
Task-number: QTBUG-45593
Change-Id: Icc3503142df4e8dbb53b4e11f409b161fd2f9bde
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
As for the window control, the existing code from the WMF plugin has
been refactored out and is now shared for both plugins.
This enables HW-accelerated video decoding in QML, QGraphicsVideoItem
and custom QAbstractVideoSurfaces (Angle is required).
Task-number: QTBUG-45593
Change-Id: I1d4dbf5695cdd4dbee93f9f4a957fa4d813aa85d
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
Use the new QHP selection format to separately list the members of
Qt Multimedia and Qt Multimedia Widgets modules in the table of
contents.
Change-Id: I50be80a820111834207967eada0865d212be98a8
Reviewed-by: Venugopal Shivashankar <venugopal.shivashankar@digia.com>
Calling restartViewfinder() would try to access m_cameraSession without
checking if it was valid. This change adds guards around the calls to
restartViewfinder(), and one in the function itself.
Task-number: QTBUG-50282
Change-Id: I1f2b4d2b2342bf2dc2b7f28a7bcd00e08a0edb44
Reviewed-by: jian liang <jianliang79@gmail.com>
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
Add locks around the global media player pool to avoid races. And since
we don't need any of the features a map provides us, there's no reason
to use one. In the most extreme case it's unlikely that there will be
more then a couple media players active at one time, so iterating over
continuously storage containing only pointers should be at least as
fast, if not faster, then a map or a hash (and use less space).
Change-Id: Id8d7810b43a9217da402a4b825d7beec891cdf74
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
This change will try to detect the optimal buffer size and sample-rate
on Android (requires API level 17+). If the device supports low-latency
playback, then it's recommended that application developers check the
preferred sample-rate through QAudioDeviceInfo::preferredFormat().
On most devices the preferred sample rate seems to be 48 KHz, so this
is now the default instead of 44.1 KHz.
Note that not all devices supports "proper" low-latency playback, and
there are no APIs to retrieve information about how many devices that
can be active at the same time; The only remotely quantitative value
I've found is "a few"...
Change-Id: I0708738b4a31f6bf9e88e9a816679cb688e023f3
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
This should be the default when the wrapper is destroyed.
Note: It's not possible to re-use the instance after release() is
called.
Change-Id: I761cac05ed2c2cda49573c69c6803b136892c528
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
Reading the meta-data can be slow and cause the UI to become
unresponsive. This is especially noticeable when the media source
is loaded from a remote location, or over a slow network.
To improve this situation the media-reader is moved off the main thread
and we wait until the media is loaded before starting the meta-data
extraction.
Task-number: QTBUG-46491
Change-Id: I0b9cf2ae6b8e08596a2f0b8fa0042d74604c46f9
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
If sample size is smaller that current periodsize,
then playing sample multiple times in loop will fail.
Reason is data offset of sample is set out of the
bounds actual sample data size.
Change-Id: I81f580cbb8dabf89db0d61528f5f1c9489216e0c
Task-number: QTBUG-49838
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
The metaDataChanged() and metaDataAvailableChanged() signals should
be emitted immediately when changing or clearing the current media.
Change-Id: I3152e2c32420ba6f11cf6780013e02208a9d6599
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
Prefer mp4 and mp3 over ogv and mkv.
Change-Id: Id24d475207ccf76e113557f9ad14775477f414aa
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
The signal was not emitted at the right time or with incorrect values
under certain circumstances.
Change-Id: Ib8b1d38381d908399752856db7b0a987c4422bb1
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
The previous behavior was to simply switch from the internal
control to the service's control, discarding anything that was
added to the playlist before binding.
We now carry over the changes made to the playlist when switching
controls. This means the switch is now transparent to the user.
When the service's control is read-only, we cannot transfer the
items, which means the user must be notified of the items that
might have been "lost" during the switch.
Auto-test modified to reflect this change.
Change-Id: Ibf80b650b06425ddbaeb320b72ac5d3082a25960
Reviewed-by: Jim Hodapp <jim.hodapp@canonical.com>
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
These were found to also fail in OSX 10.11
Task-number: QTBUG-46368
Change-Id: Ifac6fd0540ff63f3eb5198b5ac76c65ee893f005
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
These were found to fail also in OSX 10.11
Task-number: QTBUG-46331
Change-Id: I619816655c614c08183ab700bca8bd7ec5384a91
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
According to the AVCaptureDevice documentation, the device must be
locked before starting the capture session to prevent the activeFormat
from being overridden. We now do that, but only if we explicitly set
an activeFormat. Otherwise the device is not locked, which allows
the session to find an appropriate format for the capture device.
The device is also locked when enabling video capture, as doing so
might also reset the activeFormat.
Task-number: QTBUG-49170
Change-Id: I75478fd4bbfec96cd2abd2c3ae2951088b38978e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
GStreamer's backend does not implements this features, therefore now is
used the V4L2 interface for the contrast, saturation, brightness and the
sharpening adjustments. The V4l2 interface works together with the
GStreamer and covers the features which are not supported by the
GStreamer.
Change-Id: I995ed6cb096a29543fb80206384a92c13a1d1af2
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
We can simplify a code, do not need to call pVideoProcAmp->Get()
each time when we want to get current parameter value. It is
better to do this once from updateImageProcessingParametersInfos().
In this case we will return desired parameter from the local cache.
Change-Id: If33c3882230c9ae817071ace5b792dfe31685a7f
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
GStreamer does not support setup of manual color temperature for the
camera. Now it is implemented through the V4L2 interface, where it is
works together with the GStreamer and covers the GStreamer's holes.
Change-Id: Icaeadeb4e21ec7865bcfa908bead318d4ead8ba5
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
Although the Qt Multimedia module has two submodules, a
single project is sufficient to document these submodules,
avoiding unnecessary maintenance overhead.
Change-Id: I8fab48241b5c9aba35890a8aaa28ce7154f78c45
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Only use the default streams and make sure only one stream of each kind
(audio/video) is added to the topology.
Change-Id: Ied37174fa722068b4cd1b5f91b60e0cef5c1d7b3
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
Set the right flags so the renderer doesn't allocate its samples.
We can then just forward the samples we get from the upstream element
and avoid a copy.
Change-Id: Iafc15b81531a7415823d063c47a326ea6239136f
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
- report supported types (same as the video sink)
- handle type changes coming from upstream
Change-Id: I922fc4869ecac3999e055c39adf1b847127a0012
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
Some devices require MediaRecorder.setPreviewDisplay() to always be
called, even though the Android doc says otherwise.
Task-number: QTBUG-37837
Change-Id: I1e9b56f06e7c41bdf684f93b5ec7635f8ae9f379
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
QCamera can now pass raw frame data to its QAbstractVideoSurface.
The now deprecated Android camera API we're using doesn't allow to
get frame data without also displaying the frames in a SurfaceView
or a SurfaceTexture. To work around that, an invisible dummy
SurfaceView is used.
This allows to retrieve frames in the NV21, YV12, YUY2 or RGB565
formats, depending on the Android version and on the device.
Task-number: QTBUG-35416
Change-Id: I77b4f50505c3b91efb4b2288a57f50398922c0db
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
