Most of them were unnecessarily long.
Change-Id: I8942254c2211adb268e399056435e6acc940616f
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
To get the recording duration, we were using the camerabin's position,
which represents the time since it was started, not the time it's been
recording to a file.
We now retrieve the camerabin's filesink position.
Change-Id: I68eeb25d1718666288655d22deea23e25de73b90
Reviewed-by: Andrew den Exter <andrew.den.exter@qinetic.com.au>
The AVPlayerLayer was set on the QVideoRendererControl before its
geometry was updated, causing the renderer control to display frames
with an invalid size.
Change-Id: I90e18dce69d4b48a3d7932d44a7eab4fd443f1fb
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
If video surface object is set to 0, it must not be accessed to set a
property on it.
Task-number: QTBUG-40746
Change-Id: I1de0e5495918d3ea06706412fab15bf1af012f36
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Checking the sender of the mediaSourceReady signal to prevent accessing
the incorrect source resolver.
When the source resolver has finished the asynchronous operation and
the source resolver gets recreated in the player at the same time in a
different thread the signal mediaSourceReady still gets emitted from the
old source resolver.
The player assumes that the signal was emitted from the current source
resolver and accesses the unresolved media source in the
handleMediaSourceReady slot.
Task-number: QTBUG-39980
Change-Id: Ic52f6918995aac250048d91f89c520cfea111bd0
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
QMediaMetaData::AlbumArtist now maps to GST_TAG_ALBUM_ARTIST and
QMediaMetaData::ContributingArtist to GST_TAG_ARTIST.
Change-Id: Ifa2cb90ee8ae09beaee572ad113c05776e699432
Reviewed-by: Andrew den Exter <andrew.den.exter@qinetic.com.au>
- metaDataAvailableChanged was never emitted
- metaDataChanged was not emitted when clearing the current media
Change-Id: Ide05056450171a87aeb018be7e0bdea136341946
Reviewed-by: Andrew den Exter <andrew.den.exter@qinetic.com.au>
- Correctly emit positionChanged signal. One of the problems with
this was that QMediaPlayer automatically sends periodic
position updates while playing a media. There's no need to have
the same logic in the backend.
- Seeking after reaching the end of the media now correctly works
Auto tests included.
Change-Id: I6d5ecbae6e05f94a8aac1a0834cf57427adf219b
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
- Show actual recording location
- Update control buttons depending on the recorder state instead of
the status
- Create audio levels using the actual audio format from the audio
buffers. The format from the QMediaRecorder might not always contain
the value actually used.
Task-number: QTBUG-36154
Change-Id: I418b4472b0d984f47efb1a1813da6ef440ba9a40
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
To replace QCamera::availableDevices(), which is deprecated since 5.3.
Change-Id: I0b1bd6286ec78d6d26ce309d224369989d4a5063
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
The backend was kept only for Mac OS X 10.6 support. AVFoundation is
used in 10.7 and later. Following the 10.6 deprecation plan, the code
is now being removed for Qt 5.4.
Change-Id: I513d00adda35f6012dda548b8d824d158efffb16
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Emit signals only after both properties are written to avoid having
incoherent values in signal handlers.
Task-number: QTBUG-40314
Change-Id: I6c8445e61cccf1a9803647329c4fa1f0e452f56d
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
A race condition could cause a frame to be presented even after the
QAbstractVideoSurface was deleted. We now check that the surface is
valid before presenting a frame.
Task-number: QTBUG-41158
Change-Id: If593469a8267583e499e781336af38d3fbf318fd
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
The format of the offscreen surface used for video rendering should be
compatible with the EGL config.
Change-Id: Ic016245ce80c2483771e620c3eed345262d03c44
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Important warnings such as missing services are still printed though.
Task-number: QTBUG-31080
Change-Id: I96fd3837c4edc58c61b97bf950b7cab05ceed014
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
QtSystemInfo is not officially supported in Qt5 and its QML API is
currently broken. Inhibition of the screensaver is not essential
for the example anyway.
Task-number: QTBUG-31080
Change-Id: Ia2e7d8de3e2044e11e1681907e61a7207489ad1b
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
This reverts commit 0ed18d846c.
The same patch was submitted in both 5.3 and 5.4 branches. It should
have been pushed only to 5.3.
Change-Id: I9e2974886190dfb2e5def5bc325c58f6e7783f55
Reviewed-by: Robin Burchell <robin.burchell@viroteck.net>
Perform a seek before transitioning from the stopped state to paused or
playing to force the pipeline to resupply the video sink with any
pre-roll buffer it may have previously ignored during loading. And
don't assume showPrerollFrames to be true if the current state is not
stopped as the policy handling may have prevented an effectual state
change.
Change-Id: I288a70bc4da32f3534eab4b14702ca8f8fdb4222
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
We where very strict about tearing down the audio device. While this is
a good strategy to avoid unnecessary resource usage, it also causes
excessive re-allocations, e.g., when transiting from start to stop and
back again. This can increase latency, especially in case where a short
clip is re-played at a high frequency.
This change also decrease the chance of the player ending up in some
unknown state where it drops audio clips without any warning.
Task-number: QTBUG-40864
Change-Id: I1afad4af0622983f0f0c221d91cf794585d8cad2
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
According to the docs, MESessionTopologyStatus with status == MF_TOPOSTATUS_READY should be the correct place for the GetService call.
Change-Id: I7fdbedbe43b2191b35b95c7fd9c86940f58daff7
Reviewed-by: Wouter Huysentruit <wouter_huysentruit@hotmail.com>
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
This is not comprehensive since different encoders have different names
and representations for many settings, but it should cover bit rate for
most encoders, and quality and encodingMode for a number of common
encoders.
Change-Id: I0ba4e70c2f234e0deaaa02bdecc0f5198122c1e9
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
The PLS format is not clearly specified, some rules are just assumed
and files don't always respect them.
We now only look for 'File' entries, since that's the only thing we
actually use. We ignore the Version, NumberOfEntries, Title, Length
and any other unrecognized tags.
Task-number: QTBUG-40515
Change-Id: I9c176b7b68fd1441abbd50364f88994ad5d6236f
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
Make sure relative paths are resolved to a full path.
Task-number: QTBUG-40515
Change-Id: Ideb83fc3a3c4a74c84917a22e3c30162d7b6158a
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
ff527de0 was submitted to 5.3 while cddbe873 was submitted to 5.4.
The former's behavior was not preserved when 5.3 got merged into 5.4.
Change-Id: I7435ea30634001ae6e87c316eb8a8ab6f5e988e3
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
Reviewed-by: Andrew den Exter <andrew.den.exter@qinetic.com.au>
When an error is found parsing a playlist, stop
parsing. This will also prevent the emission of
the "loaded" signal when the parser finishes.
Task-number: QTBUG-40513
Change-Id: Ia814864d0d546806219993f0b727761d5d4e7903
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
When auto-play is on, EndOfMedia would not be emitted. This is due to
a workaround for mmrenderer, that wrongly ignored stop events.
Once media is played stop events will always have to be processed.
Change-Id: I1cfd665bb06638ee3c86807aecc51e78f9baa938
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
This adds a basic camera service with viewfinder (video renderer based),
still image capture, and device selection support.
Runtime apps must set the "webcam" and "microphone" device capabilities
in order to access the hardware. This can be done by adding the following
to the .pro file:
WINRT_MANIFEST.capabilites_device += webcam microphone
[ChangeLog] Enabled basic camera support in the winrt backend.
Change-Id: If4f963ef645d93c757ae23aec9a9c8aae122324f
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
