Do not build related stuff if not found.
Makes GStreamer support available on Hurd.
Task-number: QTBUG-39762
Change-Id: I1f70b6975e5bef99ab2441aac4d90508bc8b64bd
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
The audio session's category was set to Playback, which implies that
audio is still audible even after setting the device to silent mode or
locking the screen. This shouldn't be the default behavior.
We now set it to Ambient, which preserves mixing with other apps
but makes sure sound is turned off when it should.
Task-number: QTBUG-39036
Change-Id: Ic36668d73f3179dc38b41023e380e15f8c8517e0
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
In several places we where ignoring the fact that we might get an
exception from the camera code on Android. Failing to clear them will
cause the application to to terminate.
Task-number: QTBUG-39425
Change-Id: Idfe40e1749f54d551d37dae25912d9ddbc3da01e
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
Almost entire rewrite of the camera backend. It doesn't provide new
features but is more stable and behave as it should.
- Correctly report camera state and status
- Correctly report if the camera is ready to capture
- Emit imageExposed() signal
- Save captured images in an appropriate directory
- Images can be captured even without a viewport
- Better error handling
Removed the custom QVideoWidgetControl as it doesn't provide anything more
than the QVideoWidget's renderer control fallback.
Task-number: QTBUG-33782
Change-Id: I9baf6f83e7c69619f20a101921f7865a1c90d5e4
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
We were ignoring new parameter values when the camera was not loaded.
All QML properties that were set at initialization time were therefore
ignored since the camera is not loaded at that point.
We now store all camera parameters and apply them once the camera is
loaded.
Task-number: QTBUG-39307
Change-Id: If66d768941c25cede2aea1b48fb928c4735c10f8
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
The URL string passed to NSURL was not fully encoded, causing the
recorder to start with a nil URL, leading to an exception.
We now use QURL::toNSURL() which automatically encode the URL.
Task-number: QTBUG-38668
Change-Id: I06bf881a0a25fb37efd8784ebf518c8b90ecc6b4
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
Handle more thoroughly error cases, such as when the PulseAudio daemon
does not respond or terminates while QAudioInput/QAudioOutput is
active, in which cases it used to crash or hang.
We now correctly emit the error signal and change the state when errors
occur.
Task-number: QTBUG-29742
Change-Id: I173d35aece60d96e578785e1522cf78b24dcb8b8
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
The signal name is 'cameraStateChanged' but was documented as
'stateChanged'.
Change-Id: I80279613b55105a925acafc21f67c4a0917906af
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
Don't try to generate audio data with an invalid QAudioFormat, which
can happen when no audio devices are available.
Change-Id: I4de82dbf64def55fee21cf63ef99888a8084bd95
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
The async callback mechanism in ALSA is prone to deadlock.
There was already a timer fallback mechanism that appears to be
sufficient.
Task-number: QTBUG-39677
Change-Id: I44b59e6b16eea1c9c4eeb6967335ce4f468cf3c4
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
The member 'ahandler' was not used and will not be used. Removing to
avoid confusion.
Change-Id: I35f3659a650f109c564c6308573a211f324e5411
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
When playing a media for the second time, the backend resets the
the media by calling setMedia() with the same value.
The problem is that setMedia() clears the previous media, which is
a QFile in this case and is the one we are trying to set again...
The QFile was deleted, causing the current media to be a dangling
pointer.
Change-Id: I6854b40212fd084d1e31e756a040a02ad103b7ba
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
When unloading the camera, any active recording is automatically
stopped, which in turn triggers the viewfinder to be restarted...
We don't try anymore to restart the viewfinder after stopping recording
unless the camera is still active.
Change-Id: I77e4e3fc8d7116ac660d8bb23f6c400ebed4ffed
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
When setting a null custom focus point, we were correctly resetting
the focus zones but we were not emitting the focusZonesChanged signal,
causing the QML Camera to not update its focus zones.
Change-Id: I59940c4cd2979fa08dc26566dc0f6d19e503f64f
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
Always show the default audio device first in the drop-down box.
Change-Id: Icbafa9e316fd330fe7a9801a8e2efef6f20ff054
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
At least one type needs to be registered with the 5.3 version number to
make it known to the QML engine.
Change-Id: Iacfe62650b4194fbb89135fef7cb148309227ce2
Reviewed-by: Alan Alpert (Personal) <416365416c@gmail.com>
Some static variables were initialized using QMediaMetaData
values, which are also statically initialized.
Task-number: QTBUG-39202
Change-Id: Ibedc0a77d96cdfa575aad122c4ec654e6830e1f7
Reviewed-by: Andrew den Exter <andrew.den.exter@qinetic.com.au>
Using a fd is more consistent across different Android versions and
also works with files that are in the applications private storage.
Task-number: QTBUG-39346
Change-Id: I462822459d12d7842d15f1cb7caafc75c18fe32c
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
When no audio plugin is marked as default, use the first plugin
available.
Change-Id: Ide8db0fe55f43c4881c24505c1e2821b0fc176f6
Reviewed-by: Dyami Caliri <dyami@dragonframe.com>
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
If no video output is set for a camera, don't try to start the camera
and report an error.
If the video output is not ready, delay starting until it is.
Change-Id: Id08e31a4e795b71ac036a6532e9499ca5670d790
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
- Preserve the volume when changing the current media.
- Don't actually set a new volume when the media player is muted.
Intead, save the value to apply it when setMuted(false) is called.
Change-Id: I829eb280406ea35ff82a0c2638b2d19cf1d90643
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
It could lead to corrupted sound since we were overwritting buffers
that weren't played yet.
Task-number: QTBUG-39015
Change-Id: I4c015c5383b813955998145d6316acc8c22f19a3
Reviewed-by: jian liang <jianliang79@gmail.com>
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
Use Q_FOREACH instead of C++11 range-based For loops.
Task-number: QTBUG-38900
Change-Id: I2b9f8444f2ac3ae71811112244c687cab79753c9
Reviewed-by: Thomas Senyk <thomas.senyk@pelagicore.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
We restart the surface when the frame size changes, though we were
not using the correct function to get the surface's current frame size.
This was causing start() and stop() to be called for every frame.
Change-Id: I8ff4b4852cb7fcc92ac3b1b3ad7bf991d7bddc6b
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
On Android < 4.1 our temporary file is discarded without checking the
content. With this change we just open the file and pass the fd to the
mediaplayer instead.
Change-Id: I9233822725d8987c572b2d0b598721cee886de80
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
It was not taken into account at all.
Change-Id: I4ce85aba214cb4d89dcd018b1616a2a38094b5a6
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
It was returning the buffering progress for the whole media, which is
not what is expected according to the documentation.
It should return instead how much the playback buffer is filled. This
information is not available on Android so we simply return 100% when
the status is BufferedMedia or BufferingMedia, 0% otherwise.
Change-Id: I9fb55a9317948ba9375291a57bbf100f186382a2
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
Adjust texture coordinates to not render padding at the end of lines,
and better calculate the stride of UV planes.
Task-number: QTBUG-38218
Task-number: QTBUG-30447
Change-Id: I7b7577979719c48460b838f7dcc89b9d17741f79
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
The corresponding properties in the Audio and MediaPlayer QML elements
are also updated.
Change-Id: I7104d274d431e7712db2f045c375756e8c2ac03a
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Make it possible to build multimedia with a Qt namespace
Change-Id: Ibaeaf7edb38f8d784b8d0fcb9a26ca712488c23b
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
The module is not released yet; the current documentation is misleading.
Change-Id: Ia20ac8e3504942f6f60b94264f3a12497e09da24
Reviewed-by: Niels Weber <niels.weber@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
Each entry in a PLS file uses the keywords 'File', 'Title' and 'Length'
in English, it should not be translated to the user's locale...
Task-number: QTBUG-38755
Change-Id: Ibd5bee18a856b3ebc1fdb177241db7a39b65d264
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
It's now a private API in the QtMultimedia library in order to be
accessible in other plugins.
Change-Id: I63541de1e8c540cebc210f9037646ce74d866c6f
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
